Table of Contents
The Above Ground Storage Tank Inspections provide you with information about the inspection of storage tanks and storage tank testing in a construction shop and site. As well as storage tank in-service inspection in operating units.
It is crucial to ensure the safety of above ground storage tanks after they are put into operation. A diligent inspection and maintenance programme can prevent leaks, preserve your investment, and minimise costly repair and environmental damage.
API 653 Above ground Storage Tank Inspector
An API 653 Internal Inspection must be inspected by an authorized API 653 inspector. It consists of various elements. The inspector will examine records and checklists of previous inspections that have been completed since installation. They then carry out an internal and external visual inspection, ultrasonic thickness testing (UT), floor plate lap welds and chine welds vacuum box testing, tank bottom examination, and a settlement survey.
Our personnel are certified in the inspection and operation of API 653 Above ground Storage Tank Inspections. Contact us now!
How Frequently Must You Inspect Your Above ground Storage Tank?
There are several factors to consider when determining the inspection frequency for storage tanks. API 653, 6.2.1 lists all the factors, including corrosion prevention and corrosion allowances, as well as jurisdictional requirements, product storage characteristics, visual maintenance check results, and operation mode changes.
Normally, inspection frequencies are as follows:
- Monthly: Personnel knowledgeable about the facility, the tank, and the product stored must visually check the external condition of the tank for Routine In-Service Inspections.
- Every 5 years: This External Inspection is required as part of the in-service process. The Ultrasonic Thickness Inspection of the shell is included in this inspection.
- Every 10 years: An Internal Inspection must be conducted 10 years after the tank’s in-service date unless safeguards are listed in API 653 Table 6.1, which extends the initial interval.
- Subsequent Internal Inspection intervals: Based on the data from the last Internal Inspection, subsequent Internal Inspection intervals will be determined, as well as on API 653 procedures to determine corrosion rates or Risk Based Inspection (RBI) assessments.
Before the Internal Inspection, you must thoroughly clean the tank’s interior to make sure that the tank’s internal components and structure can be inspected. Make sure to remove all products, water, and debris.
Is It A Good Idea To Use The Same Contractor For Both Inspection And Repairs?
Origin Endeavours believes that the firm doing the API 653 inspection and the firm doing the repairs should be separate. This is needed in order to eliminate any appearance of a real conflict of interest. Our API 653 Inspectors are always dedicated to delivering the highest quality service. Each company is unique, so our audit, inspection, or certification will be adapted to suit your demands.
We can guarantee you that when you choose Origin Endeavours for tank inspection. You will receive the finest results possible, thanks to our newest technology and tools.
Remember, you are responsible for the risks associated with aboveground storage tanks. We at Origin Endeavours are here to help you mitigate those risks if you so desire.
